As soon as I disconnected the faulty drive, the problem never surfaced again.
It’s probably not a mystery, however for some reason your computer is trying to boot to other devices and not your hard drive.
Please note that the you can boot up Any computer, fix & install Windows easy with a boot disc especially made for this error.
Of course you can try everything listed below first as you might get lucky! 🙂 There are many possible causes when your computer boots to black screen and I will try to mention as many as possible.
You can restart your computer and get into your bios to change these settings.
Here’s how to get into your bios and change settings.
The problem is, if there are two programs clashing, there is not much you can do to stop this.. For this reason, when installing absolutely anything on your computer, including a simple toolbar, I recommend you create a restore point for safety reasons. Anyway, if you see that flashing cursor you are almost guaranteed that your computer will boot from a CD or DVD. Of course at this stage, when you see the flashing cursor, it is too late to insert the CD, and it is too early for other remedies.
When you insert your operating CD you must restart your computer. You installed a larger hard drive and now you have a black screen with a blinking cursor.When you enter Safe mode you should then shut your computer down correctly. To adjust your power saving sleep mode go to the control panel, then choose the power options icon.Did you leave a USB flash drive connected to your computer or maybe an external hard drive?Below in the comment section one person had a card inserted into a printer and the computer was trying to boot to that so you really need to look outside the box for this step.Another cause could be that you have a faulty device such as a DVD drive or CD drive.Some causes of a black screen are incorrect shutdown of your computer, not waking from sleep mode, not knowing where to boot to, corrupt software, damaged start up, and the list goes on.